BCS Laser Scythe 100cm / 40" Cutter Bar Attachment

BCS Laser® Scythe Cutter Bar

IMPORTANT! All Scythe Cutter Bars require either a Short or Long Oil Transmission. This will depend on which Two Wheel Tractor model you have - please see table below. If unsure please contact us.

Cut vegetation of any height or density up to 1” thick with the Laser® scythe cutter bar. It's ideal for managing wildflower meadows and cutting long grasses for haymaking.

The scythe has anti-clog serrated blades that will effortlessly cut through woody material up to 1” diameter, including brambles and even first year saplings. They also excel at cutting tall grass, bracken, wildflowers and more.

The Laser® scythe cutter bar comprises two blades. The top blade moves from side to side and is fitted with a number of serrated triangular teeth.

The scythe makes a single scissor-like cut at the base of the vegetation, leaving the material whole. This is what makes the scythe the best tool for cutting long grass for haymaking and for cutting wildflowers.

Because the cutter bar is located out at the front of the machine it can get into areas that other mowers can’t, such as under fences, round the base of trees, at the edge of water, and so on.

The cutting height is easily increased or decreased from ¾” (2cm) to 3¼” (8cm) by adjusting the skids that are positioned on each side of the cutter bar.

They are also very economical to run as the power unit should never be on more than one-quarter throttle so fuel consumption is very low.

Are any couplers or toolbars needed?
If the power unit has the Implement Quick Coupling fitted then you will need an Additional Coupler.
Please note: The BCS 660HY and 750 power units have their own specific coupler.

Is there anything else required?
If the machine is being used on sloping banks then twin wheels or steel bank wheels are recommended to help improve traction and stability.

IMPORTANT! All Scythe Cutter Bars require either a Short or Long Oil Transmission. Please refer to Table below to look at options.

Which power units will the scythe cutter bar fit to?