BCS Snow/Powered Brush Attachment 80cm

BCS Snow/Powered Brush Attachment 80cm

This brush will clear snow up to 10cm deep leaving a clear, safe surface, and is also the ideal tool for clearing leaves, mud, moss etc from a large variety of surfaces from tennis courts to block paving.

The brush is available in three widths, 80cm (32"), 100cm (40"), or 120cm (47") and is fitted with heavy duty nylon bristles which are very hard wearing.

The rear castor wheels assist with manoeuvrability and also allow for easy height adjustment - simply add or remove the spacers as required to make the brush higher or lower. The working angle is easily adjusted either left, right or straight ahead by selecting one of three holes.

Because the brush is PTO mounted, it will also pivot separately to the tractor to follow the contours of the ground.

The brush is made up of sections of wavy and straight brushes which means that the bristles can be replaced in sections. This is very cost effective as if one side wears more quickly then just an individual section can be changed.

This powered brush is the ideal tool for many different sweeping applications including leaves, moss, mud and more. It also excels as a snow brush, easily clearing snow up to 10cm deep to leave a clear, safe surface.

What are the minimum power unit requirements?
4.8hp petrol engine.
One working speed.
4.00 x 8 agricultural wheels.

Are any couplers or toolbars needed?
If the power unit has the Implement Quick Coupling fitted then an Additional Coupler will be required.

Please note: The BCS 660 and 750 power units have their own specific coupler.

Compatible power units: