BCS Adjustable Ridger Attachment for BCS750

BCS Adjustable Ridger

The adjustable ridger is ideal for "earthing up" and for creating ridges and furrows in previously cultivated ground.

The adjustable ridger will create ridges and furrows in previously cultivated ground.

The ridger consists of a "V" shaped body that penetrates the soil to break up the surface. The furrow is created by the two adjustable mouldboards which are hinged to the body and so push the earth off to the side.

The adjustable ridger will create furrows up to 385mm (15”) wide.

It fits to the power unit via a toolbar and so relies on the traction of the power unit to pull it through the ground.

See also the trailed ridger, which fits into the back of the rotavator.

Because of drag created by the ridger, the use of optional spade lug wheels and/or wheel weights is recommended.

* with wings at maximum width

What are the minimum power unit requirements?
4.8hp petrol engine.
Two working speeds.
4.00 x 8 agricultural wheels.

Are any couplers or toolbars needed?
If the power unit has the Implement Quick Coupling fitted then a Blank Coupler will be required.

Is there anything else required?
Spade lug wheels may be beneficial and/or wheel weights if extra traction is needed.